Emergency 2x2 LED Backlit Panel Light – Selectable Wattage & CCT

The Emergency 2×2 LED Backlit Panel Light combines selectable general lighting with an integrated 20W emergency battery-backup system. Designed for commercial T-grid ceilings, it provides uniform backlit illumination during normal operation and automatically switches to emergency output when AC power is lost.

Key Features

• Selectable wattage: 20W, 25W, 30W, 35W or 40W
• Selectable color temperature: 3000K, 3500K, 4000K, 5000K or 6500K
• Emergency backup: Integrated 20W emergency LED driver
• Emergency runtime: Minimum 90 minutes after a full charge
• Automatic operation: Transfers to emergency mode when normal AC power fails
• Testing: Charging indicator and test switch included
• Normal input: 120–277VAC, 50/60Hz
• Emergency-driver input: 100–347VAC, 50/60Hz
• Dimming: 0–10V dimmable during normal operation
• Efficiency: Up to 125 lm/W and approximately 5,000 lumens at 40W
• Optics: Wide 110° light distribution
• Rated life: Up to 50,000 hours
• Construction: White aluminum housing with a high-transmission polycarbonate lens
• Dimensions: Approximately 23.7 × 23.7 × 1.61 inches
• Mounting: Recessed T-grid ceiling or compatible surface-mount frame
• Certifications: ETL and DLC-listed panel-light platform
• Warranty: Five-year limited manufacturer warranty

Emergency Operation

When normal power is present, the standard LED driver powers the panel and the emergency battery remains in charging mode. During a power failure, the emergency driver automatically supplies up to 20W to the LED load. Allow 24 hours for a full initial charge before conducting a complete 90-minute discharge test.

Recommended Applications

• Offices and conference rooms
• Retail and commercial interiors
• Schools and educational facilities
• Healthcare and institutional spaces
• Hotels and restaurants
• Corridors and other areas requiring emergency illumination

Installation note: This is hardwired emergency equipment and requires an unswitched AC feed for the battery charger. Installation and testing should be completed by qualified personnel in accordance with the manufacturer’s instructions and locally adopted electrical and life-safety requirements. The available documentation does not establish a damp-location rating for the complete assembled fixture. Do not install it in damp, wet, outdoor or hazardous locations unless the manufacturer confirms the applicable rating for this exact configuration.